Viewing 1 to 10 of 18 items
Archive | July, 2014

How do I remove glued on clamps ?

Hmm – check the dimensions first – then if ok, cut the clamps off – use a fine sharp hacksaw, use the old clamp as the guide and turn the tube regularly as you cut softly – basically , you keep scoring the tube until you have cut through it.

0

How fast will my pump drain my battery ?

The AMP rating on the pump is the maximum draw that will occur when it is pushing against the maximum resistance (the PSI rating) before the pressure switch cuts off. In your case, let’s say your pump is rated 60PSI. When the pump is not under load, it will draw less than half it’s rating,  Full Article…

0

What is the fastest way to run hose ?

I really believe in 10m, (30ft) lengths of 1/2″ hose with quick connects .. And hooks in the van. This way you lay the hose, not pull the hose. From the van to the farthest corner of the job. When you are packing up, disconnect all the joiners, 1m (3ft) loops in your left hand,  Full Article…

0

Tell me about the Reach-iT MINI

ABOUT THE Reach-iT MINI The great thing about the Reach-iT MINI is the intentional versatility that it brings you. I say intentional because when we talk about pull-apart, the cheapest manufacturing process is to make a tube with no ‘stoppers’ and the poles that pull apart at every section really have no ‘design’ .. no  Full Article…

0